How To Disconnect The Sprayer Hose From A Delta Faucet?

5/5 - (1 vote)

If your sprayer hose or delta faucet malfunctions, like leaking or spilling, you need to remove it from the system and perform necessary repairs. However, dissembling these components is not easy.

But fear not, as we will show you how to disconnect the sprayer hose from a delta faucet. Let’s follow the five steps below to nail it!

How To Disconnect The Sprayer Hose From A Delta Faucet?

The sprayer hose is connected to the delta faucet. It uses water pressure and gravity to work. When you open the faucet, water will travel to the sprayer hose. And that’s how the system works.

You want to disconnect the sprayer hose from your delta faucet to fix the malfunctioning component. But first, ensure you have gathered all of these tools:

  • A new sprayer hose (if the old one is damaged)
  • An adjustable wrench
  • A screwdriver
  • A bucket

Step 1: Disconnect the water supply

If the water is still running, you can handle the pipes and the faucet. Hence, before you start, cut the water supply in the system by turning off the water valve knob.

Step 2: Drain the water

There may be water residue in your sprayer hose, which will annoy you when you loosen the nuts. So, put a bucket under the faucet to drain all the water inside it. Then, it won’t drop when you work.

Step 3: Loosen the nuts

To remove the sprayer hose, you need to loosen the nuts that secure it. The hose often has a C-clip that can prevent spilling and leaking. Yet, not all hose models have this component.

If your spray hose comes with a metal C clip, it may sit between the sprayer and the outlet. After finding it, turn it counterclockwise and pull it out. Then, keep it carefully, as you will reinstall it later.

The correct method for disconnecting the sprayer hose depends on the type of faucet. There are two common choices:

  • Single handle and centerset faucet

Rotate the nut that secures the faucet to remove the sprayer head. Then, take the head out and put it in a safe box.

Old faucets may have mineral buildup in the joint between the sprayer head and the hose. Hence, you will find it hard to rotate the nut.

To solve this problem, soak the sprayer head in a vinegar and water mixture for about 30 minutes to eliminate the grime. Then, try turning the nut.

  • Pull-out faucet

If you use a pull-out faucet, turn the spray hose into a loop so it won’t return to the faucet’s neck. Then, pull it out.

The sprayer head works in two different mechanisms: threaded connection and quick release.

  • If you are working with the threaded connection, use a wrench to remove the nut and interrupt your sprayer hose.

If your sprayer hose has the quick release mechanism, you can remove your sprayer head by pressing the release button.

Check the type of faucet to discontent the sprayer hose correctly
Check the type of faucet to discontent the sprayer hose correctly

Step 4: Detach the sprayer hose

Pull the sprayer hose from the deck fitting. You need a screwdriver to release the deck fitting nut and pull it out from the opposite side.

Step 5: Assemble the components

Now, you can check for any corrosion and leaking signs in your sprayer hose. If necessary, replace it with a new one. Sometimes, you just need to replace the sprayer head.

Another method is to reinstall the sprayer hose and run the water. If you detect any leakage issue, use silicone glue to heal it.

After fixing, screw the deck fitting and connect the sprayer hose to the deck. The hose should fit into the faucet’s stem.

Finally, test your installation by turning on the water line and checking how it runs.

Replace the sprayer hose if necessary
Replace the sprayer hose if necessary

Preparation Tips To Get The Job Done Quickly

Proper preparation will help you perform those steps faster and get an ideal outcome. So what can you do about it?

Workspace preparation

You can’t work in a mess. Instead, have everything you need at hand in a well-organized space. This tip helps you memorize what you will do next. Otherwise, you may spend a whole day looking for the tiny nut or C-clip.

Besides, clear all the stuff under the sink so you have a spacious room to work, and the only thing you should put there is a bucket to catch the dripping water.

Enough room to work

Do not work if you are in a rush or your kitchen is noisy. Concentration and caution play a vital role in this project.

As a result, give yourself more time than expected to complete this task. Time will be even more critical if you haven’t tried it before.

Tips to speed up the process
Tips to speed up the process

Conclusion

There are only five steps in the whole process. The key here is to identify the type of the faucet. Then, you can tell how it works and how to remove the hose.

Hopefully, this article can help you handle the sprayer hose and delta faucet effortlessly. Do not hesitate to ask if you have any difficulty following our guidelines. Thank you for reading!